Загрузка...

 

Exaton 27.31.4.LCuR is a covered electrode of AWS E383-17 type with rutile coating and normal metal recovery for welding of high-alloy austenitic stainless steels of UNS S08028 (e.g. Sanicro 28) and Alloy 825 type (e.g. Sanicro 41).Exaton 27.31.4.LCuR is suitable for joining highly alloyed fully austenitic stainless steels, such as EN 1.4563 (Sanicro 28) and Alloy 825 (Sanicro 41), which have high corrosion resistance in sulphuric and phosphoric acids and excellent pitting resistance in acid solutions containing chlorides and fluorides, such as sea water.This electrode can be used for surfacing mild and low alloy steels to give protection against pitting corrosion in chloride-containing solutions. Because the product is a bit sensitive for forming hotcracks, a correct welding practice is important.

Загрузка...

Описание

 

Exaton 27.31.4.LCuR is a covered electrode of AWS E383-17 type with rutile coating and normal metal recovery for welding of high-alloy austenitic stainless steels of UNS S08028 (e.g. Sanicro 28) and Alloy 825 type (e.g. Sanicro 41).Exaton 27.31.4.LCuR is suitable for joining highly alloyed fully austenitic stainless steels, such as EN 1.4563 (Sanicro 28) and Alloy 825 (Sanicro 41), which have high corrosion resistance in sulphuric and phosphoric acids and excellent pitting resistance in acid solutions containing chlorides and fluorides, such as sea water.This electrode can be used for surfacing mild and low alloy steels to give protection against pitting corrosion in chloride-containing solutions. Because the product is a bit sensitive for forming hotcracks, a correct welding practice is important.

 

Типичные свойства образца с V-образным надрезом по Шарпи

После сварки
Работа удара 49 ft-lb
Работа удара 66 J
Защитный газ ISO
Температура испытания 68 °F
Температура испытания 20 °C

Механические свойства при растяжении

Защитный газ Предел прочности при растяжении Предел текучести Состояние Удлинение
ISO 612 MPa (89 ksi) 427 MPa (62 ksi) После сварки 38 %

Данные наплавки

Ток Время горения электрода при 90% от макс. Тока Производительность наплавки при токе 90% от максимального Диаметр КПД, % Кол-во электродов/кг наплавл. Металла В
40-95 A 33 sec 1.2 kg/h (2.6 lb/h) 2.5 x 300.0 mm (0.098 x 11.8 in.) 60 % 87 30 V
55-125 A 50 sec 1.6 kg/h (3.5 lb/h) 3.2 x 350.0 mm (1/8 x 13.8 in.) 60 % 45 30 V
70-185 A 48 sec 2.5 kg/h (5.5 lb/h) 4.0 x 350.0 mm (5/32 x 13.8 in.) 61 % 30 31 V

Классификации

Классификации EN ISO 3581-A : E 27 31 4 Cu L R
SFA/AWS A5.4 : E383-17
Werkstoffnummer : 1.4563

Одобрения

Класс EN 13749
Общество CE
Одобрения на материалы выдаются с привязкой к заводу изготовителю. Подробную информацию можно получить в представительствах ESAB.

Характеристики расходного материала

Тип сплава Austenitic CrNiMo
Тип покрытия Acid Rutile
Содержание ферритной фазы FN 0
Сварочный ток AC, DC+

Хим. состав наплавленного металла

Хим. состав наплавленного металла
C Co Cr Cu Mn Mo N Ni P S Si
&lt.=0.025 % 0.060 % 27 % 0.9 % 0.90 % 3.5 % 0.07 % 32 % 0.018 % 0.006 % 0.8 %

Отзывы

Отзывов пока нет.

Будьте первым, кто оставил отзыв на “Exaton 27.31.4.LCuR”

Ваш адрес email не будет опубликован. Обязательные поля помечены *

КАТАЛОГ