Загрузка...

 

Exaton 22.9.3.LB is a chromium-nickel-molybdenum-nitrogen covered electrode with basic coating for welding of 22-23%Cr duplex (austenitic-ferritic) stainless steels (e.g. Sandvik SAF 2205). The basic type of electrode combines good welding properties in all positions and high impact strength at low temperatures. The weld metal is characterized by high strength and very good pitting corrosion resistance as well as very good resistance to stress corrosion cracking in chloride containing media.Exaton 22.9.3.LB is used for welding of duplex and lean duplex stainless steels in service temperatures up to 280°C (536°F). It is also used in applications where good impact toughness properties is required below -40°C.Typical base materials to be welded are ISO: 1.4462, 1.4362, 1.4162, 1.4662, 1.4660 and 1.4417.

Загрузка...

Описание

 

Exaton 22.9.3.LB is a chromium-nickel-molybdenum-nitrogen covered electrode with basic coating for welding of 22-23%Cr duplex (austenitic-ferritic) stainless steels (e.g. Sandvik SAF 2205). The basic type of electrode combines good welding properties in all positions and high impact strength at low temperatures. The weld metal is characterized by high strength and very good pitting corrosion resistance as well as very good resistance to stress corrosion cracking in chloride containing media.Exaton 22.9.3.LB is used for welding of duplex and lean duplex stainless steels in service temperatures up to 280°C (536°F). It is also used in applications where good impact toughness properties is required below -40°C.Typical base materials to be welded are ISO: 1.4462, 1.4362, 1.4162, 1.4662, 1.4660 and 1.4417.

 

Типичные свойства образца с V-образным надрезом по Шарпи

после сварки iso

Механические свойства при растяжении

Защитный газ Предел прочности при растяжении Предел текучести Состояние Удлинение
ISO 840 MPa (122 ksi) 670 MPa (97 ksi) После сварки 27 %

Данные наплавки

Ток Время горения электрода при 90% от макс. Тока Производительность наплавки при токе 90% от максимального Диаметр КПД, % Кол-во электродов/кг наплавл. Металла В
55-80 A 49 sec 0.7 kg/h (1.5 lb/h) 2.5 x 300.0 mm (0.098 x 11.8 in.) 56 % 103 24 V
70-115 A 61 sec 1.2 kg/h (2.6 lb/h) 3.2 x 350.0 mm (1/8 x 13.8 in.) 60 % 51 24 V
90-175 A 62 sec 1.6 kg/h (3.5 lb/h) 4.0 x 350.0 mm (5/32 x 13.8 in.) 57 % 36 25 V
120-230 A 67 sec 2.4 kg/h (5.3 lb/h) 5.0 x 350.0 mm (0.197 x 13.8 in.) 55 % 23 26 V

Классификации

Классификации Werkstoffnummer : 1.4462
SFA/AWS A5.4 : E2209-15
EN ISO 3581-A : E 22 9 3 N L B

Одобрения

Одобрения BV 2209
CE EN13479
DNV-GL Duplex
Одобрения на материалы выдаются с привязкой к заводу изготовителю. Подробную информацию можно получить в представительствах ESAB.

Характеристики расходного материала

Тип сплава Duplex CrNiMoN
Тип покрытия Basic
Содержание ферритной фазы FN 35-50
Сварочный ток DC+

Хим. состав наплавленного металла

Хим. состав наплавленного металла
C Cr Cu FN WRC-92 Mn Mo N Ni P PRE S Si
&lt.=0.04 % 23 % 0.1 % 44 % 1 % 3.2 % 0.18 % 9 % &lt.=0.03 % &gt.=35 % &lt.=0.025 % 0.6 %

Отзывы

Отзывов пока нет.

Будьте первым, кто оставил отзыв на “Exaton 22.9.3.LB”

Ваш адрес email не будет опубликован. Обязательные поля помечены *

КАТАЛОГ